Model: SR-2 SOIL RESISTIVITY METER
Model: SR-2
Soil Resistivity Meter
Features
-
4.5 Digital Display
-
0.01 Ω to 3.3 MΩ range
-
Push button operations
-
DL-1 Data logger connection
-
Low battery indicator
-
Internal rechargeable battery (12V)
-
Battery charger included
-
MIL-SPEC Instrument enclosure
The Model SR-2 includes:
-
SR-2 Instrument built into a Mil-Spec Case
-
9v battery (installed)
-
12v Battery (Rechargeable)
-
Battery Charger (110V, 220V)
-
Instructions Manual
-
Certificate of Calibration
Uses
-
New pipeline surveys
-
Direct assessment surveys
-
U.S.T. surveys
-
Anode bed installations
-
Geological surveys
-
Archeological Surveys
The SR-2 is a highly accurate and easy to use soil resistivity meter.
Model: SR-2 SOIL RESISTIVITY METER
Calibration
-
Recommended Annually
Dimensions
-
10.75" x 10.75" x 6.5", 6 lbs. (273mm x 273nn x 165mm, 2kg)
Environment
-
0ºC to to 50ºC (32ºF to 122ºF)
Specifications
-
0.01 Ω to 3.3 MΩ Range
-
+/- 10% Accuracy
9 Volt Battery Replacement:
Model: SR-2 SOIL RESISTIVITY METER
Parts
-
#085-132 SR-2 Instrument
-
#031-025 Charger, battery, 12v Li
-
#010-037 Battery, rechargeable Li
-
#010-007 Battery, 9 Volt SR-2 Takes One
Note:
The Model SR-2 ships with the 31-025 charger which includes a power cord for use in North America. In other regions of the world, an adapter may be required. Users may also find a local source for a replacement power cord. This is a standard cord in use throughout the world. IEC 320 C7 Non Polarized connector. See picture below.
Available Accessories
-
#073-083 Soil Pin: 3/16"x 12" Stainless Steel (4 pins needed) (Not Shown)
-
#026-094 Reel & Cable, $285.00 each. Single, 4 conductor wire reel for use with Model SR-2 Soil Resistivity Meter. 4 color coded leads with a center hub connection point. Reel allows up to 20’ pin separations using the Wenner 4 Pin Method. Each lead terminated in clamp. - (Not Shown)
-
Use:Use in the field or in the lab. has an easy to figure form factor of 10.Model SB-1 is made of strong plastic resins allowing for rugged field use. Material is clear for easy visual inspection and cleaning.
Soil Box Leads
-
#026-073 SB-1 Leads
-
#026-068 SB-2 Leads
#SR-2V Verification Test Unit
Use to test accuracy and calibration on soil resistivity meters. Ranges include 150 Ohm, 15.0 Kohm, 150.0 Kohm and 1.50 Mohm