ATTENTION!

Due to international shortages on micro chips, we can not guarantee the availability of the CE-IT until further notice.

Details
Brochure
Instructions
Tech Data
Parts List
CE-IT below ground insulator tester

Applications

  • Below Ground Insulators

  • Use successfully as a casing short investigative tool

  • Use Regardless of CP or other current/voltage present or structure

Model: CE-IT

CE-IT%20new_edited.jpg

Model: CE-IT

Below Ground Insulator Tester / CE-IT

US $775.00

Features

  • Gives test results via digital display

  • Results given

    • Effectiveness of Buried Pipe Insulators

    • Isolation condition of pipelines in road crossing casings

  • Good to indicate broken wire

  • Automatic off to ensure long battery life

Included

  • Instrument

  • (6) AA Batteries

  • Connector with leads and clamps

  • Instructions Manual

CE-IT Capabilities

  • Senses & Replicates:External polarity, External Voltage,

  • Analogues,Internal Voltage Reference with External Voltage

  • Measures flowing current throughout the testing cycle

  • Gives result of test considering the above tested parameters

  • Battery life exceeds 50 hours  

The CE-IT gives fast and accurate testing of below ground insulators and road crossing casings. This fully automatic unit tests the insulator without any adjustment by the operator needed.

Model: CE-IT

The Model CE-IT Insulator Tester is fully automatic and highly sensitive electronic instrument designed to test the effectiveness of buried pipeline insulators. The CE-IT can also be used to determine isolation condition of pipelines in road crossing casings. 

The Model CE-IT circuit automatically adjust to the voltage polarity present on the underground piping system under test. A read out of the test results are displayed in English on the LCD meter. The entire testing procedure is complete in less than 30 second and audible signal alerts the operator when test cycle is completed. Although the Model CE-IT is equipped with power start switch, the instrument will automatically shut off in 10 minutes if not in use, to conserve batteries. 

The Model CE-IT is factory calibrated, ready to use and requires no field adjustment.

Model: CE-IT

Specifications

  • Battery Operated

  • (6) Alkaline "AA" batteries (replaceable)

  • Cables and probes included

Dimensions

  • 8" x 4"  x 3", 2 lbs. (203mm x 101.6mm x 76.2mm, 0.907kg)

Model: CE-IT

IMPORTANT NOTE:

Do not use this instrument in an explosive environment.

Model: CE-IT

Parts & Accessories

  • #085-114 CE-IT Instrument - US$775.00

  • #026--050 Cable Connector Assembly - US$15.80

  • #010-002 Battery, AA Cells - US$1.77 Each CE-IT Takes Six Each