Tech Data
Parts List
M2 Holiday Detector, Tinker & Rasor

Model M/2 Multi Volt Wet Sponge Holiday Detector

The Model M/2 builds upon the success of the Model M/1 low voltage holiday detector, known Worldwide as the best choice for the inspection of thin film coatings (0 to 20 mils). Beyond the multiple output voltages of the M/2, there are numerous improvements from the M/1, including the single 9v battery in an easy to access battery compartment, ergonomic handle and comfortable foam grip, locking 15' ground connector, and the all new sponge and sponge holder. The automatic calibration verification remains and the M/2 is checked internally each time it is used in the field with no other test apparatus needed. LED indicators show Power, voltage, low battery, calibration error, and the M/2 includes both audible and visual alarms for holidays. The M/2 comes complete ready go to work right out of the box. Headphones may be used in noisy environments that drown out the normal audio signal.

Model M/2 Multi Volt Wet Sponge Holiday Detector


Stick Type Low Voltage,"Wet Sponge" Holiday Detector

US $495.00


  • 9v, 67.5v, 90v DC output

  • Lightweight Wand - wands can be combined for greater reach

  • Audible & Visual holiday detecting indicators

  • Ergonomic stick type unit

  • 80kΩ, 90KΩ, and 400KΩ resistances

  • automatic calibration verification

  • Headphone jack

  • Battery operated (9v) (A/C version available 115v / 240v)

Included with the M2:

  • Instrument with battery

  • 15’ Locking Ground Cable

  • 18" wand

  • Sponge electrode 6" x 3.5" x 2" (Ships Compressed)

  • 4 oz. Bottle of "water wetter"

  • Instructions Manual

  • (1) 9v battery included

Multiple voltages makes the M/2 the best choice for use around the world.

Model M/2 Multi Volt Wet Sponge Holiday Detector

M2 Kit Replacement Accessories

  • 085-156 M/2 Instrument with battery

  • 026-101 Ground Cable 15' (4.5720m)

  • 049-014 Water Wetter Wetting Solution, 8oz.

  • 028-086 CANVAS BAG

  • 177-070 WAND HANDLE

  • 055-882 Electrode, Sponge, 6" x 3.5" x 2"

  • 076-050 Sponge Holder

  • 094-030 Sponge Holder Knob

  • 014-195 Sponge Backing Plate

  • 010-007 Battery, 9v

Model M/2 Multi Volt Wet Sponge Holiday Detector

Model M/2 Multi Volt Wet Sponge Holiday Detector


Use on thin film coatings on conductive substrates such as tanks, concrete, etc.

  • Conforms to standards for low voltage holiday detectors, such as:

    • NACE RP0188

    • ISO 14654, ISO 8289-A

    • ASTM G62, G6, D5162

    • India BS EN ISO 28765:2016, Australia AS 3894.2-2002 (R2013), Japan JIS K 6766:2008


  • Recommended Annually


  • 9v DC, 90K ohm Resistance
    67.5v DC, 80K ohm Resistance
    67.5v DC, 90K ohm Resistance
    90v DC, 400K ohm Resistance


  • 12.25" x 3.5" x 1.75" Instrument, 2 lbs. (311mm x 89mm x 45mm, 1 kg)-Instrument operating size
    20" x 5.5" x 4", 3 lbs. (508mm x 139.7mm x 101.6mm, 1.35kg)- Shipping size