-M/1 Pinhole Detector- |
|
-M/1 Pinhole Detector- |
| M/1Lightweight
and ease of use makes the M-1 the professionals choice.
The M-1 is known Worldwide as the best
choice for the inspection of thin film coatings (0 to 20 mils). The totally
redesigned M-1 now uses six "AA" batteries and advance circuitry to produce
67.5 volts. With on-board calibration verification, the M-1 can be checked
in the field with no other test apparatus needed. An LED lights on the
front panel when the unit is in calibration and when a holiday is detected.
The M-1 comes complete ready go to work right out of the box. Headphones
may now be used in noisy environments that drown out the normal audio signal.
For more information see the M/1 Instruction page.
Included with the M-1
M1/AC
The same features found in our Model M-1
are also found in the Model M1/AC. The M1/AC is powered by 115 volt, 60
Hz, A.C. and produces a regulated output voltage of 67.5 volts D.C. . This
allows for 24 hour "in-plant" operation without down time for battery changes.
The M1/AC is used extensively in rebar coating and other production
type coating plants.
A warning bell and light indicator alerts
the operator when a holiday is detected. This warning system can be heard
above most ambient sound levels
As with all Tinker & Rasor equipment
the Model M1/AC is rugged, reliable and ready for work right out off the
box.
For more information see the
M1/AC Instructions Page.
|
