CI-50
The Model CI-50 is an affordable choice
for the interruption of cathodic protection systems, both induced and galvanic.
The CI-50 is housed in a aluminum case small enough to fit inside most
commercially available rectifiers. This lightweight, durable instrument
has a timing range from 5 to 45 seconds over a continuous timing range.
MODEL
CI-50 SPECIFICATIONS:
Timing Range:
Selectable from 5 to 45 seconds
Timing Selection:
any combination in the 5 to 45 second range.
Ratings:
-
DC: 50 amps
28 volts (resistive load)
-
AC: 50 amps
120 volts (resistive load)
-
AC: 50 amps
240 volts (resistive load)
Battery:
use only 12 volt battery!!!!
Burgess #TW2-X or #TW2
Eveready #732
RCA #VS342
NEDA #926
Battery Life:
approx. 30 hours
Dimensions:
5-3/4" X 3-3/4" X 10-1/2"
Weight:
Operating weight is less than six pounds
For more information see the
CI-50 Instructions Page.
QC
The QC has the same accuracy found in most
high quality quartz wrist watches. Simply select the desired ON - OFF timing
cycles, turn the "QC" on and let it go to work.
MODEL
QC SPECIFICATIONS:
Timing Ranges:
two ranges. 1 minute cycle and a 30 second cycle.
Timing Selection:
1 minute cycle divided at any 5 second interval; 30 second cycle divided
at any 2.5 second interval;
Ratings:
-
DC: 50 amps
28 volts (resistive load)
-
AC: 50 amps
120 volts (resistive load)
-
AC: 50 amps
240 volts (resistive load)
Battery:
use only 12 volt battery!!!!
Burgess #TW2-X or #TW2
Eveready #732
RCA #VS342
NEDA #926
Battery Life:
approx. 40 hours
Dimensions:
5-3/4" X 3-3/4" X 10-1/2"
Weight:
Operating weight is less than six pounds
For more information see the
QC Instructions Page.
The QC Timing Chart
