USING
THE QC-100A
1.
Turn the QC-100A on using the power switch on the front panel.
The POWER ON indicator
will light.
2.
When the QC-100A is turned on, the display will read Enter local
time. Enter the current
time in a 24-hour format. The display will
then show the Main
Menu. If the QC-100A has been previously
programmed, the unit
will begin execution of the program(s)
stored in non-volatile
memory.
3.
SCROLLING MENU OPTIONS
Programming mode
Enter new programs, beginning with Program
#1.
Delete existing programs as a group.
Note: 7 programs maximum.
Editing mode
Edit existing programs.
Erase a single program.
Add a program, beginning with the next
available program.
Cycle mode
Choose a program to cycle indefinitely.
View mode
Review programs currently stored in the
QC-100As memory
or the current time programmed on the
QC-100A.
Exit
Leave menu and begin automatic execution
of stored
programs.
TO
PROGRAM THE QC-100A
Choose 1 from the menu.
Press any key other than E.
Enter the Program start time. Note:
Enter local time using 24
hour format (military time e.g.
2:00 P.M. is 14:00.00). Program
start time must be equal or later
than previous program stop
time if both programs are for the
same day.
Enter the program stop time. Note: Stop
time must be later
than stop time if the program starts
and stops on the same day.
Enter the program On interval. Note:
How long you want the
current to be applied to the structure.
Enter the program Off interval. Note:
How long you want the
current to be removed from the
structure.
TO
DELETE ALL PROGRAMS
Choose 1 from
the menu.
Press E.
Press 1 to confirm
delete.
TO
DELETE A SINGLE PROGRAM
Choose 2 from
the menu.
Press any key
other than E.
Press D.
Enter program
number to delete.
The program
is now deleted and the remaining programs are
moved up.
TO
ADD A PROGRAM
Choose 2 from
the menu.
Press any key
other than E.
Press A to add
a program. Note: 7 programs maximum.
Enter program.
Note: Same steps as described in the
programming
mode.
TO
EDIT A PROGRAM
Choose 2 from
the menu.
Press any key
other than E.
Press E to edit
a program. Note: 7 programs maximum.
Enter the program
number to edit.
Enter dates and
times as in programming mode or press
F to go
forward to the next entry.
TO
ENTER CONTINUOUS CYCLE MODE
Turn on the QC-100A.
When the display
reads Enter local time, enter the current
time
in 24-hour format.
Choose 3 from
the Main Menu.
Enter a Program
number to cycle, or E to exit.
The QC-100A
will begin interrupting immediately to the start
and stop
times in the selected program.
To exit the Continuous
Cycle mode, press any key while the
unit is interrupting.
TO
VIEW PROGRAM CONTENTS
Choose 4 from
the menu.
Press any key
other than E.
Choose 0 to
view program, 1 to view time.
Choose program
number to display.
The QC-100A
will display start and stop times.
Press any key
to move to the next display.
The QC-100A
will display the On and Off intervals.
Press any key
to return to the Main Menu.
NOTES
After Programming
the QC-100A, the programs are stored in
non-volatile
memory, until the user either over-writes or
erases them,
even if the unit is turned off.
To enter the timer
mode, program the QC-100A with at
least
1 program. When the time reaches the programmed start
time
the unit will begin interrupting until the programmed stop
time
is reached. If more than one program exists, the QC-100A
will
automatically re-enter timer mode after completion of the
program,
and wait for the next programmed start time. During
the
wait, current is applied to the structure.
To enter Main Menu
from the view mode, press E at any time.
TO
SYNCHRONIZE ADDITIONAL QC-100AS
Connect synchronize
cable to the Output jack on the front
panel
of the first or master QC-100A.
Connect the other
end of the synchronize cable to the
Input
jack of the second QC-100A.
If you are connecting
three or more interrupters, simply
connect
another synchronize cable to the Output jack of
the
second interrupter and into the Input jack of the third.
Continue
connecting additional interrupters in a daisy
chain
until all interrupters are connected.
Turn on the power
to all interrupters.
Enter the current
time on the keypad of the Master
QC-100A.
If all the interrupters are to have the same
program,
enter the program data on the Master QC-100A.
After all interrupters
have been programmed, disconnect
the
synchronize cables and install the interrupters at
desired
locations.
SHIPPING
INSTRUCTIONS
All instruments being returned for repair
should be sent PREPAID to either address below:
Tinker & Rasor
417 Agostino Road
P.O. Box 281
San Gabriel, CA 91778
Include with shipment information the nature
of the problem, purchase order, serial number and return delivery address.
Immediate
service is guaranteed! |
